MG1503 “MIG” Replacement Scales
Replace your old or damaged MIG Thickness Gauge scales. This replacement scale set works with the new MG1500 (yellow label) and the previous model (red label).
 Set Includes:
- Glass & Air Thickness (inch and mm)
- Overall IG Thickness (inch)
- Overall IG Thickness (mm)
- Laminated Glass & Air (inch and mm)
Do not risk making a mistake in measuring window thickness with an old or damaged MIG Thickness Gauge scale. Order yours today and be assured of an accurate measuring scale on your meter.
Related products
CM2030 “THE EDGE” Low-E Coating Detector
"The EDGE" Low-E Coating Detector is an inexpensive option for glass and window manufacturers who must determine if there is a Low-E coating on the top surface of the glass. This rugged little instrument is the perfect product for testing your single panes of Low-E in production. The design allows for testing Low-E coatings in the Center of the glass as well as Edge deletion on the perimeter of the coated glass. Features include an edge/stop on the bottom of the enclosure for convenient edge deletion testing.
RC3175 R-CHEK+ Surface Resistivity Meter
Remove all doubt and ensure your product is coated correctly... without breaking the bank! EDTM is proud to offer budget-friendly Four Point Sheet Resistance Meters calibrated to standards that are traceable to a NIST traceable source.
The resistance of a thin film/coating is directly proportional to the resistivity and is a critical QUALITY CONTROL component of a coating. Therefore, resistivity may be the most important factor in determining the repeatability and function of a coating. Sheet resistance has the unit of ohms, but it is convenient to refer to it in ohms per square since the sheet resistance produces the resistance of the coating within any square area. Therefore, this parameter is measured using the 4-point technique.
SD2400 Spectrum Detective
Salespeople can open up their product literature and give statistics about their window. Still, the Spectrum Detective will help you stand apart from other salespeople and shed a positive light on your window product. Â The SD2400 allows you to demonstrate your window's energy performance in front of your customer's eyes with a live demonstration.
SG2700 Strengthened Glass Detector
Confirm if your single or double-pane glass has been strengthened.  Strengthened glass can include Heat Strengthened Glass, Tempered Glass, and Safety Glass. It is also sometimes referred to as "Toughened Glass."  Test single or multiple panes - on double-pane glass, you can test both panes at the same time. This is especially helpful with installed windows when one side of the glass is difficult or impossible to get to. It is also much more efficient in the factory - testing on either side offers substantial time savings and is more straightforward than being required to test both sides. Identify the thickness of the first pane of glass.
SP1065 BTU/Watt Solar Power Meter
The SP1065 can now switch between two units of measure: BTU/hr*ft^2 and Watts/M². Switching between modes is easily accomplished by using the buttons on the new embossed style power switch that also provides a smooth front surface and a sleeker appearance. Whichever unit of measure is chosen by the user becomes the default mode for the meter.
The change in power switch style is accompanied by an auto-power off circuit that will turn the meter off after a period of inactivity. This will help extend the life of the batteries in this portable device.
SP1080 BTU/Watt Solar Power Meter
The NEW improved SP1080 BTU/Watt Solar Meter has all the same features and performance as the original SP1065. It can switch between two units of measure:  BTU/hr*ft^2 and Watts/M². Switching between modes is easily accomplished by using the buttons on the new embossed-style power switch that provides a smooth front surface and a sleeker appearance.
The membrane-style power switch style is accompanied by auto-power-off the circuit that will turn the meter off after a period of inactivity. This will help extend the life of the batteries in this portable device.
TC2800 Tint-Chek+ Window Tint Meter
Measure VLT or Visible Light Transmission (Transmittance) of automotive glass and any glass/film up to 1/4" or 6.5mm thick. Â The TC2800 has several advantages over existing tint meters in the marketplace and upgrades that set it apart from our TC1800 model. Additionally, the TC2800 is designed for law enforcement, police, and tinters.
